Drywall repair and replacement
We cut out soft, stained, or moldy drywall and replace it with moisture-resistant board. Seams get taped, mudded, and sanded smooth. Small patches cure in four to six hours; larger sections dry overnight before paint.
Bathroom Drywall and Painting Scottsdale AZ is the fastest way to fix cracked walls, failing caulk lines, and peeling paint in one visit. We patch the drywall, seal it, and finish with moisture-resistant paint built for Arizona bathrooms. If you searched bathroom drywall repair and paint Scottsdale, our crew handles both trades under one roof so you are not waiting on two separate contractors.

Bathroom Drywall and Painting Scottsdale AZ is a two-part service: we repair the drywall first, then paint it with a moisture-resistant coating. That means cutting out soft or moldy sections, replacing them with moisture-resistant drywall, taping and mudding the seams, sanding smooth, and priming before a single coat of paint goes on. In a bathroom, the drywall and the paint fail together. Fix one without the other and the problem comes back in a season.
Most Scottsdale bathrooms we open up show the same pattern: hard water stains near the shower head, grout deterioration along the wet wall, and failing caulk lines that let water sit against the drywall. Homes in 85251 and 85258 often have original 1990s drywall behind the tile. We see mold and mildew in the corners, and exhaust fan failure makes it worse. That is why bathroom drywall repair and paint Scottsdale work has to start with finding the moisture source, not just covering the stain.
Every job includes the drywall repair and the paint, not one or the other. We also handle the small items that make the finish last, like caulk lines and primer. Add-ons like tile work, new fixtures, or a full remodel are quoted separately.
We cut out soft, stained, or moldy drywall and replace it with moisture-resistant board. Seams get taped, mudded, and sanded smooth. Small patches cure in four to six hours; larger sections dry overnight before paint.
Patches get spot-primed, then the walls and ceiling get two coats of bathroom-rated paint. We use eggshell or satin on walls and flat on ceilings. This is the finish that handles steam and splash in a Scottsdale bathroom.
We remove failing caulk lines at the tub, shower pan, and vanity backsplash and replace them with silicone caulk. That keeps water out of the wall cavity. Painter's caulk is not the right product in a wet area, so we do not use it there.
Scottsdale homes have a range of wall textures, from smooth to light orange peel. We match the existing texture on every patch so the repair disappears under paint. If the whole wall needs re-texturing, we quote that up front.
We tape off the vanity cabinet, mirror, shower glass, and countertop before we start. Floors get drop cloths. We pull the toilet if the wall behind it is in scope and reinstall it with a new wax ring when we are done.
The lead walks the room with you before we pack up. We point out the caulk lines, the paint sheen, and the drywall patches so you know what to expect. If something is off, we fix it on the spot.
We walk the bathroom, check the moisture meter against the wet wall, and look for shower pan leaks or failing caulk lines. You get a written price the same day. Most quotes take 30 minutes, and we tell you on the spot whether the drywall needs a patch or a full replacement.
We lay drop cloths, tape off the vanity cabinet, mirror, and shower glass, and pull the toilet if the wall behind it is in the scope. A typical bathroom takes 20 minutes to prep. Dust control matters, so we use a HEPA vac on the sanding step.
We cut out damaged board with an oscillating multi-tool, check the framing with a moisture meter, and install moisture-resistant drywall. Seams get taped and mudded, then sanded smooth. Small patches cure in four to six hours; larger sections dry overnight.
We spot-prime the patches, then roll two coats of moisture-resistant bathroom paint. Ceilings get a flat finish, walls get an eggshell or satin. Between coats we run an exhaust fan and a box fan to pull humidity out, which cuts dry time from six hours to about two.
We reinstall the toilet, re-caulk the tub and shower pan with silicone caulk, and clean the room. You walk the job with the lead before we pack up. If anything is not right, we fix it before we leave, not on a return trip.
We walk the bathroom, check the moisture meter against the wet wall, and look for shower pan leaks or failing caulk lines. You get a written price the same day. Most quotes take 30 minutes, and we tell you on the spot whether the drywall needs a patch or a full replacement.
We read the wall before we close it up. Anything above 15 percent means there is still water in the cavity and we keep looking for the source.
Cuts drywall cleanly around outlets, plumbing stub-outs, and tile edges. It gives us a straight cut line so the patch fits tight and the texture blends.
Attached to the sander on every pass. It pulls drywall dust out of the air instead of letting it settle on your vanity and floors.
Used to set a straight line for tile edges and to check that the wall is flat before paint. A bowed wall shows in raking light, so we fix it before the finish coat.
Applies silicone caulk at the tub, shower pan, and backsplash. A steady bead is what keeps water out of the wall cavity.
Locates framing for grab bar blocking, cabinet installation, and new fixture mounting. We mark the studs before we cut so the patch lands on solid wood.

Black mold spots covered a two-foot section of the ceiling above the shower. The exhaust fan had been dead for over a year, and the drywall was soft to the touch. Paint was peeling in a ring around the stain.
After: We replaced the fan, vented it outside, cut out the moldy drywall, and rebuilt the ceiling with moisture-resistant board. Two coats of flat bathroom paint finished it. The ceiling reads dry on the moisture meter and the room clears steam in under five minutes.
Book this service →
A running toilet soaked the wall behind it for months. The drywall was soft and the paint was bubbling. The baseboard had started to pull away from the wall.
After: We replaced the toilet fill valve, cut out the wet drywall, and installed moisture-resistant board. After texture matching and two coats of eggshell paint, the wall is solid. We reinstalled the toilet with a new wax ring and re-caulked the base.
Book this service →
The caulk line at the tub had failed and water was getting behind the wall. Paint was cracked along the tub deck and the drywall paper was peeling. The damage ran about three feet along the wall.
After: We removed the failing caulk, dried the wall cavity, and repaired the drywall. New silicone caulk went down at the tub deck, and we painted the wall with a satin bathroom finish. The crack has not returned through two shower seasons.
Book this service →Most bathroom drywall damage in Scottsdale comes from water, not from age. These are the problems we see most often and how we stop them from coming back.
Ask a pro →We remove the affected drywall, treat the framing, and rebuild with moisture-resistant board. Then we install or repair the exhaust fan so steam leaves the room. Painting follows once the wall reads dry on a moisture meter.
We re-tape the seam, re-set the corner bead if it is loose, and use a flexible silicone caulk line at the tub. Then we prime and paint with a bathroom-rated finish that moves with the wall instead of cracking.
We fix the plumbing leak first, confirm the cavity is dry, then cut out and replace the damaged drywall. After texture matching and paint, the wall is solid again and the vanity sits flush.
We open the wall, check for a shower valve or pan leak, and repair the drywall. Then we prime and paint with a moisture-resistant bathroom paint. If the shower surround is failing, we quote the waterproofing and tile at the same time.
Most Scottsdale bathroom drywall and painting jobs run $450 to $1,800 in 2026, depending on how much drywall gets replaced and whether the ceiling is included. A single wall patch with paint starts around $450. A full bathroom with new moisture-resistant drywall, texture, and two coats of paint lands closer to $1,800. Water damage behind the tile pushes the number higher because we have to open the wall and treat the framing.
A moisture-resistant bathroom paint with an eggshell or satin sheen on the walls and a flat finish on the ceiling. Satin handles the splash zones around the sink and shower better than flat. We use a bathroom-rated acrylic that resists mildew and wipes clean. For the ceiling, a flat bathroom paint hides roller marks and handles steam without the shine you get from semi-gloss.
A single-wall patch and paint takes one day. A full bathroom with new drywall, texture, and two coats of paint takes two to three days. Mud has to dry between coats, and we will not rush that. If we are replacing drywall around the shower, add one day for waterproofing and caulk cure time before the room goes back into service.
Yes, if the drywall is soft, stained, or reading above 15 percent on a moisture meter. Paint over a wet wall peels within a season, and mold and mildew come back. We cut out the damaged section, confirm the wall cavity is dry, and rebuild with moisture-resistant drywall. If the board is solid and dry, we can usually sand, prime, and paint without replacing it.
Call now and we will quote your bathroom drywall repair and paint in Scottsdale the same day. Licensed, insured, and warrantied work from a local crew. One call covers the drywall and the paint.
Get a Free Quote +18556124434 →Call +1 855-612-4434 or email [email protected] and we will get back to you the same business day. We answer the phone Monday through Friday, 8:00 to 18:00, and we schedule walkthroughs across Scottsdale and Maricopa County within a few days. Bring your wish list and your budget.